ARCHIVED - Broadcasting Decision CRTC 2011-664
This page has been archived on the Web
Information identified as archived on the Web is for reference, research or recordkeeping purposes. Archived Decisions, Notices and Orders (DNOs) remain in effect except to the extent they are amended or reversed by the Commission, a court, or the government. The text of archived information has not been altered or updated after the date of archiving. Changes to DNOs are published as “dashes” to the original DNO number. Web pages that are archived on the Web are not subject to the Government of Canada Web Standards. As per the Communications Policy of the Government of Canada, you can request alternate formats by contacting us.
Route reference: Part 1 application posted on 26 August 2011
Ottawa, 25 October 2011
CIAM-FM Media & Radio Broadcasting Association
Fort Vermillion and Cleardale, Alberta
CIAM-FM-12 Cleardale – Technical change
1. The Commission approves the application by the CIAM-FM Media & Radio Broadcasting Association to change the authorized contours of its transmitter CIAM-FM-12 Cleardale by decreasing the antenna’s effective height above average terrain from 48.5 to 39.07 metres and relocating the transmitter site. The Commission did not receive any interventions concerning this application.
2. The applicant stated the change was necessary due to a lack of space on the tower that was originally proposed.
3. The Department of Industry (the Department) has advised the Commission that while this application is conditionally technically acceptable, it will only issue a broadcasting certificate when it has determined that the proposed technical parameters will not create any unacceptable interference with aeronautical NAV/COM services.
4. The Commission reminds the licensee that pursuant to section 22(1) of the Broadcasting Act, this authority will only be effective when the Department notifies the Commission that its technical requirements have been met and that a broadcasting certificate will be issued.
*This decision is to be appended to the licence.
 The technical parameters reflect those approved by the Department of Industry.
- Date modified: